1: 4-digit alphanumeric display / alternating indication of red and green
2: LEDs (display unit / switching status)
3: Programming button
4: Upper part of the housing can be rotated by 345°
5: Process connection sealing FKM / DIN 3869
Made in Germany
Product characteristics
Electronic pressure sensor
M12 connector
Function programmable
Measuring element: metal thin film cell
Process connection: G ¼ A / M5 I (according to DIN EN ISO 1179-2)
2 outputs
OUT1 = switching output
OUT2 = analogue output
4-digit alphanumeric display / alternating indication of red and green
Measuring range: 0...400 bar / 0...5800 psi / 0...40 MPa
Application
Type of pressure: relative pressure
Group 2 fluids according to the Pressure Equipment Directive (PED),
group 1 fluids on request
Application
80 MPa11580 psi800 barPressure rating
170 MPa24650 psi1700 barBursting pressure min.
-1000Vacuum resistance [mbar]
-25...80Medium temperature [°C]
Electrical data
DC PNPElectrical design
18...30 DC ¹)Operating voltage [V]
< 35Current consumption [mA]
> 100 (500 V DC)Insulation resistance [MΩ]
IIIProtection class
yesReverse polarity protection
Outputs
2 outputs
OUT1 = switching output
OUT2 = analogue output
Output
PN3570
Pressure sensorsPN-400-SEG14-MFRKG/US/ /V
normally open / closed programmable; 4...20 mA or 0...10 VOutput function
150 (...80°C) / 200 (...60°C) / 250 (...40°C)Current rating [mA]
< 2.5Voltage drop [V]
pulsedShort-circuit protection
yesOverload protection
≤ 170Switching frequency [Hz]
4...20 mA; 0...10 VAnalogue output
4...20 mA: max. 500Max. load [Ω]
0...10 V: min. 2000Min. load resistance [Ω]
Measuring / setting range
0...40 MPa0...5800 psi0...400 barMeasuring range
Setting range
0.4...40 MPa40...5800 psi4...400 barSet point, SP
0.2...39.8 MPa20...5780 psi2...398 barReset point, rP
0.2 MPa20 psi2 barin steps of
Accuracy / deviations
Accuracy / deviations
(in % of the span)
< ± 0.5Switch point accuracy
< ± 0.25 (BFSL) / < ± 0.5 (LS)Characteristics deviation *)
< ± 0.25Hysteresis
< ± 0.1Repeatability **)
< ± 0.05Long-term stability ***)
Temperature coefficients (TEMPCO) in the temperature range -25...80° C (in % of the span per 10 K)
0.2Greatest TEMPCO of the zero point
0.2Greatest TEMPCO of the span
Reaction times
0.3Power-on delay time [s]
< 3
Min. response time switching
output [ms]
0...50Delay time programmable dS, dr [s]
0...4
Damping for the switching output
(dAP) [s]
0...4
Damping for the analogue output
(dAA) [s]
< 3Response time analogue output [ms]
yesIntegrated watchdog
Software / programming
hysteresis / window function; NO / NC; on delay, off delay; damping; display unit;
current/ voltage output
Programming options
Interfaces
IO-Link Device
COM2Transfer type
1.1IO-Link revision
IEC 61131-9SDCI standard
427 d / 00 01 ab hIO-Link Device ID
Smart Sensor: Process Data Variable; Device Identification, Device DiagnosisProfiles
PN3570
Pressure sensorsPN-400-SEG14-MFRKG/US/ /V
yesSIO mode
ARequired master port type
1Process data analogue
1Process data binary
2.3Min. process cycle time [ms]
Environment
-25...80Ambient temperature [°C]
-40...100Storage temperature [°C]
IP 65 / IP 67Protection
Tests / approvals
97/23/EG: Sound engineering practicePressure equipment directive
EMC
DIN EN 61000-6-2
DIN EN 61000-6-3
Shock resistance
50 g (11 ms)DIN EN 60068-2-27:
Vibration resistance
20 g (10...2000 Hz)DIN EN 60068-2-6:
Mechanical data
G ¼ A / M5 I (according to DIN EN ISO 1179-2)Process connection
FKM (nach DIN 3869)Process connection sealing
1.4542 (17-4 PH / 630)²Materials (wetted parts)
1.4542 (17-4 PH / 630)²; stainless steel (316L / 1.4404); PBT/PC-GF 30; PBT-GF
20; PC
Housing materials
100 millionSwitching cycles min.
Tightening torque [Nm] 25...35 (recommended tightening torque³)
2.548Weight [kg]
Displays / operating elements
Display
3 x LED green (bar, psi, MPa)Display unit
1 x LED yellowSwitching status
4-digit alphanumeric display / alternating indication
of red and greenMeasured values
Electrical connection
M12 connector; Gold-plated contactsConnection
Wiring
Core colours
blackBK
brownBN
blueBU
whiteWH
OUT1: switching output or IO-Link
OUT2: 4...20 mA / 0...10 V
Colours to DIN EN 60947-5-6
Remarks
Remarks
*) BFSL = Best Fit Straight Line / LS = Limit Value Setting
**) with temperature fluctuations < 10 K
***) in% of the span / 6 months
¹) to EN50178, SELV, PELV
²) Characteristics similar to stainless steel (e.g. 304/1.4301) but higher
strength.
PN3570
Pressure sensorsPN-400-SEG14-MFRKG/US/ /V
³) Depends on lubrication, seal and pressure rating
1Pack quantity [piece]
ifm electronic gmbh • Friedrichstraße 1 • 45128 Essen — We reserve the right to make technical alterations without prior notice. — GB — PN3570 — 29.05.2015
PN3570
Pressure sensorsPN-400-SEG14-MFRKG/US/ /V
